控制电缆
阻燃控制电缆Flame Retardant Control Cable
一.适用范围
本产品用于额定电压450/750V及以下有阻燃要求的控制、监控回路及保护线路等场合。
Application
Applicable to the control system，controlloop andprotection cricuit(which request flame-retardant)with the rated voltage 450/750V(orlower)
二.执行标准
GB/T9330.2.3-2008
GB/T19666-2005(等同IEC6033160332)
mplementation ofstandards
GB/T9330.2.3-2008
GB/T19666-2005(equaltolEC60331，60332)
三.使用特性
1.导体最高工作温度:聚氯乙烯绝缘70C，交联聚氯乙烯绝缘90°C。
2.安装敷设时环境温度不低于0C。
3，安装敷设时最小弯曲半径:无铠装6X电缆外径，有屏蔽层软电缆6X电缆外径，有铠装或铜带屏蔽12X电缆外径。
Using characteristics
1.The max working temperature of conductor(of a cable)is 70C(PVCinsulated): 90C(XLPEinsulated).
2.The ambient temperature forlayingiS notlowerthan 0C .
3.The least allowed bending radius steeltape-armoredcable is 6 times the outer diameter ofthe cable:6 times the outer diameter of the cable(the screensoft cable); steel tape-armored or cu tape armoredshield calble is 12 times the outer diameter ofthe cable
四、型号、名称 Type and Denomination
型号 Type | 产品名称 Denomination |
| ZA(B、C、D)KVV | 聚氯乙烯绝缘聚氯乙烯护套阻燃A(B、C、D)类控制电缆 PVC insulated and sheathed flame-retardant A(B.C.D)control cable |
| ZA(B、C、D)KVVP | 聚氯乙烯绝缘编织屏蔽聚氯乙烯护套阻燃A(B、C、D)类控制电缆 PVC insulated and sheathed braid shield flame-retardant A(B.C.D)control cable |
| ZA(B、C、D)KVVP2 | 聚氯乙烯绝缘铜带屏聚氯乙烯护套阻燃A(B、C、D)类控制电缆 PVC insulated and sheathed Cu tape armored shield flame-retardant A(B.C.D)control cable |
| ZA(B、C、D)KVVP3 | 聚氯乙烯绝缘铝塑复合带屏蔽聚氯乙烯护套阻燃A(B、C、D)类控制电缆 PVC insulated and sheathed aluminum tape armored shield flame-retardant A(B.C.D)control cable |
| ZA(B、C、D)KVV22 | 聚氯乙烯绝缘钢带铠装聚氯乙烯护套阻燃A(B、C、D)类控制电缆 PVC insulated and sheathed steel tape armored flame-retardant A(B.C.D)control cable |
| ZA(B、C、D)KVVP2-22 | 聚氯乙烯绝缘铜带屏蔽钢带铠装聚氯乙烯护套阻燃A(B、C、D)类控制电缆 PVC insulated and sheathed Cu tape armored shield control steel tape armored flame-retardantA(B.C.D)control cable |
| ZA(B、C、DKVV32 | 聚氯乙烯绝缘细钢丝铠装聚氯乙烯护套阻燃A(B、C、D)类控制电缆 PVC insulated and sheathed steel wire braid flame-retardant A(B.C.D)control cable |
| ZA(B、C、D)KVVR | 聚氯乙烯绝缘聚氯乙烯护套阻燃A(B、C、D)类软控制电缆 PVC insulated and sheathed flame-retardant A(B.C.D) soft control cable |
| ZA(B、C、D)KVVRP | 聚氯乙烯绝缘编织屏蔽聚氯乙烯护套阻燃A(B、C、D)类软控制电缆 PVC insulated and sheathed braid shielded flame-retardant A(B.C.D) soft control cable |
ZA(B、C、D)KYJV | 交联聚乙烯绝缘聚氯乙烯护套阻燃A(B、C、D)类控制电缆 XLPE insulated PVC sheathed flame-retardent A(B.C.D)control cable |
| ZA(B、C、D)KYJVP | 交联聚乙烯绝缘编织屏蔽聚氯乙烯护套阻燃A(B、C、D)类控制电缆 XLPE insulated PVC sheathed b raid shield flame-retardent A(B、C、D)control cable |
| ZA(B、C、D)-KYJVP2 | 交联聚乙烯绝缘铜带屏蔽聚氯乙烯护套阻燃A(B、C、D)类控制电缆 XLPE insulated PVC sheathed Cu tape armored shield flame-retardent A(B.C.D)control cable |
| ZA(B、C、D)KYJVP3 | 交联聚乙烯绝缘铝塑复合带屏蔽聚氯乙烯护套阻燃A(B、C、D)类控制电缆 XLPE insulated PVC sheathed aluminum tape armored shield flame-retardent A(B.C.D)control cable |
| ZA(B、C、DKYJV22 | 交联聚乙烯绝缘钢带铠装聚氯乙烯护套阻燃A(B、C、D)类控制电缆 XLPE insulated PVC sheathed steel tape armored flame-retardent A(B.C.D)control cable |
| ZA(B、C、D)-KYJVP2-22 | 交联聚乙烯绝缘铜带屏蔽钢带铠装聚氯乙烯护套阻燃A(B、C、D)类控制电缆 XLPE insulated PVC sheathed Cu tape armored shield control steel tape armored A(B.C.D)control cable |
| ZA(B、C、D)KYJV32 | 交联聚乙烯绝缘细钢丝铠装聚氯乙烯护套阻燃A(B、C、D)类控制电缆 XLPE insulated PVC sheathed steel wire braid A(B.CD)control cable |
五、规格范围 Specification range
型号 Typ | 标称截面mm2 Nominal cross section area mm2 | ||||||
| 0.75 | 1.0 | 1.5 | 2.5 | 4 | 6 | 10 | |
芯数 Core NO. | |||||||
ZA(B,C,D)-KVV ZA(B,C,D)-KVVP ZA(B,C,D)-KYJV ZA(B,C,D)-KYJVP | 2-61 | 2-14 | 2-10 | ||||
ZA(B,C,D)-KVVP2 ZA(B,C,D)-KVVP3 ZA(B,C,D)-KYJVP2 ZA(B,C,D)-KYJVP3 | 4-61 | 4-14 | 4-10 | ||||
ZA(B,C,D)-KVV22 ZA(B,C,D)-KVVP2-22 ZA(B,C,D)-KYJV22 ZA(B,C,D)-KYJVP2-22 | 7-61 | 4-61 | 4-14 | 4-10 | |||
ZA(B,C,D)-KVV32 ZA(B,C,D)-KVJV32 | 7-61 | 4-61 | 4-14 | 4-10 | |||
| ZA(B,C,D)-KVVR | 2-61 | 4-14 | 4-10 | ||||
| ZA(B,C,D)-KVVRP | 2-61 | 4-14 | 4-10 | ||||
六、主要技术参数 Technolgicalparameters
序号 No | 项目 Project | 单位 Unit | 指标 Index | 试验方法 Test method |
| 1 | 电缆结构及导体电阻 Cable structure and conductor resistance | 符合GB/T3956-2008标准(IEC60228:2004) Complies with the standard ofGB/T3956-2008(IEC60228:2004) | GB/T3048.4-2007 | |
| 2 | 绝缘线芯交流50Hz火花试验 Spark test(AC.Voltage 50Hz) | KV | 6 | GB/T3048.9-2007 |
| 3 | 工频5min电压试验 Frequency(5min)voltage test | KV | 3 | GB/T3048.8-2007 |
| 4 | 绝缘线芯电压试验 Insulation voltage test 0.6mm及以下≤0.6mm 0.6mm及以上=0.6mm | KV | 2 2.5 | GB/T3048.8-2007 |
2.阻燃性能Flame-retardant
A单根阻燃性能A Single-core flame-retardant
| 代号Code | 代号Code试样外径D Specimen diameter(mm) | 供火时间 For fire time index(S) | 合格指标 Complianceindex | 试验方法 Test method |
Z | D≤25 | 60 | 试样烧焦应不超过距上夹具下缘50mm-540mm的范围之外 Specimen char is far from fixture50mm-540mm | GB/T18380.1-2001 (IEC60332-1:1993) GB/T18380.2-2001 (IEC60332-2-25:1989) |
| 25<D≤50 | 120 | |||
| 50<D≤75 | 240 | |||
| D>75 | 480 |
B成束阻燃性能B The bundle flame-retardant
代号Code | 试样非金属材料体积(L/m) Volume ofspecimenno-metallic material(L/m) | 供火时间 For fire timeindex | 合格指标 Compliance index | 试验方法 Test method |
ZA ZB ZC ZD | 7 3.5 1.5 0.5 | 40 40 20 20 | 1.试样上炭化的长度最大不应超过距喷嘴底边向上2.5m; Specimen carbonation is far from theedge of nozzle as 2.5m 2.停止供火后试样上的有焰燃烧时间不应超过1h The flaming time is no longer than 1hafter fired | GB/T18380.3-2001(IEC60332-3:1992)(IEC60332-3-25:2000) |
联系人：朱经理
地址：高邮市菱塘工业集中区
